High-Tech PIR Based Alert System

Voice Alert System-6 is a high tech home security and driveway alarm system at an affordable price.

The Voice Alert System 6 allows comes out of the box with a wireless PIR based motion detector and a plug-in base unit.  The thing that makes the VA6000S different than other wireless alert systems is that you record your own message on the base station.  There is a record button for you to record your own message for up to 6 zones.  There are many accessories avaiable as well such as a vibration sensors sold separately.

For example, you could put a wireless PIR motion sensor at the entrance for your driveway.  On zone one of the base station record a message like "motion detected in driveway," thus giving you a driveway alarm.  You could then put a motion sensor at the back gate of your fence.  When movement is detected near the fence, record a message on zone two like "movement detected at back gate." 

The VA6000S is a powerful system.  The base station has four "C" relays that trigger to a corresonding zone.  As an example, mount a vibration sensor on the back gate and when the gate opens, a "C" relay on the base station triggers a flood lamp to turn on, scaring away a potential intruder.

Potential applications of the VA6000S system:

• Wireless Driveway Alarm Security System
• Monitor un authorized access areas of your business
• Monitor movement around back yard or pool at your home
• Integrated part of an overall security system

The VA6000S can monitor the zone simulaneously.  You can easily mount the PIR sensor anywhere you want to monitor movement.  The wireless sensor is outdoor rated, has a universal adjustable mounting bracket, adjustable senitivity settings, templates for multiple beam patterns and a wireless range of up to 1,000 feet depending on environmental factors.

The VA6000S is also now avaible in two additional configurations:  Rubber hose with motion sensor and solar powered vibration sensor.

The solar powered sensor rubber hose Voice Alert System is a great driveway alarm system.  When a car runs over the rubber hose, the air pressure triggers a vibration sensor which then sends a wireless signal to the base station.  The vibration sensor is powered by a NiCad rechargeable battery and has a solar cell on top to recharge the battery. 

Please note that the Hose Must Be Placed on Asphalt or Concrete Driveways ONLY, can not be used on gravel driveways!

Currently, the TXPCCB Sensors come in two flavors, the TXPCBB and the TXPCCB-V.

These are wireless transmitter devices inside rugged NEMA Boxes with four mounting tabs.  This rugged outbox allows you to mount it out doors in harsh, even wet conditions.  The wireless transmission range of the sensor is approximately 1,000 feet.  Indoors or through walls the range will be effectively at 300 feet.

The sensor is powered by a 9-Volt alkaline battery (one year of battery life) or a 9-Volt Lithium Battery (apprx 3 years of battery life.)  The system has a low battery life indicator to alert the use when the battery is running low.

The sensing device has an output closers that when triggered, send the wireless transmission signal to the base station, which will then announce the previously recorded message.  The radio signal is triggered by input from either Normally Open (NO) or Normally Closed (NC) devices.  This enables you to connect a variety of other sensing devices to the specialy sensor, which when triggered, can send a wireless signal to the base station.  This means you won't have the need of running cables or wires and that you can also incorporate the VA6000S system into a larger security system.

A good example would be a flooding sensor.  You could wire your flood detector sensor  to the sensing sensor.  When the Water is detected, the flood sensor, wired to the NC or NO output closure which then sends a message to the VA6000S base station, giving you an alert.

The TXPCBB-V is similar to the TXPCBB except it has an internal vibration switch, that when triggered, sends a radio signal to the base station.

• When installed at a height of 7.5 feet above the ground, the area covered will be approximately 40 x 40.  
• The sensor is based on passive infrared heat motion.
• Enclosed in NEMA box for all weather conditions.
• 9 volt alkaline battery or 9 volt litium battery.
• 1000 feet wireless transmission range/ 300 feet through walls or other similar obstacles.
• On/off switch selector for visible LED for transmission status
• Transmitts at 433.92 MHz.
• FCC Part 15 approved.

• Six zones capable of recording approximately a six second message each.
• The base station/receiver/speaker supports an unlimted number of sesnors, transmitters. 
• Adjustable volume control.
• Missed message indicator alerts to missed messages.
• Flashing LED indicates low battery on sensors.
• Solid-state construction.
• Powerful 433.92 MHz receiver.
• Magnetically shielded speaker.
• FCC Part 15 approved.
• Receiver Stability: Crystal
• Receiver sensitivity: -100dBm